Intake Manifold

This is for a set of "M" headmark Intake Manifold bolts for 57-67 Chevrolet 327 engines - 250 / 300 Horsepower - Black phos finished.  Fits Corvette model years: 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967....

This is for a Good Used General Motors Aluminum Intake Manifold, (GM Part Number 10105143, GM Group Number 3.265).  It looks like it was installed on a crate motor and remove before it was ever fired up.  The EGR valve looks new also and is included with the intake.  We believe this fits most GM 305 engi...

This is for One Refurbished repaired Corvette Aluminum Intake Manifold, GM Part Number 3959594,  fits C3 model years 1971 1972.   It is dated 2/14/71.   It has been repaired and no thread problems.    The thermostat and port areas are poor (See Pictures) functionally ok.   ...

This is for a Good Used Edelbrock C396 Big Block Chevy, (BBC), Aluminum Oval Port Intake Manifold, (Model C454), for 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 1982 82 1983 83 1984 84 and 1985 85 396, 402, 454 and 502 Engines. ...

This is for a Good Used Original Chevrolet 4-Jet or WCFB Iron Intake Manifold GM Part Number 3844457, GM Group Number 3.265 Fitment 1964 Chevrolet with  220 HP 283 & 250 HP 327 CID and many other Chevrolet V-8 applications.    They have had the oil shields removed for cleaning and inspection for ...

This is a Very Nice Original Chevy Chevrolet Aluminum Manifold, (GM Part Number 3814678, GM Group Number 3.265) for 1961 61 1962 62 1963 63 with 409 CID Engines. It is dated 3-20-62.  It has a correct original oil fill tube - GM Part Number 3711724. The shield is not shown in in pictures, but it is included and wi...

This is for ONE, Good Used Original Chevy Casting Big Block Aluminum High Rise Square Port Intake Manifold, (GM Part Number 3933163, GM Group Number 3.265). This is a Zues Service Replacement Intake. It looks like it may have had some minor repairs in the past.  NOTE:WE HAVE OVER 4000 CHEVROLET INTAKE MANIFOLDS IN...

This is a Nice Good Used Edelbrock Model TM2R Model 2695 for Big Block Chevy 396, 402, 427, 454 and 502 Engines with the Rectangular Port Heads.  With a straight edge across the carb flange, it measures 4.5" at the front of the intake and it measures 5.5" at the back of the intake. This item can be picked up ...

This is a Very Nice Original Chevy Chevrolet AFB Dual Quad Aluminum Manifold, (GM Part Number 3814881, GM Group Number 3.265) for 1961 61 1962 62 1963 63 1964 64 with 409 CID Engines. We also have complete engines and other 409 parts in other listings. "Keep Your GM Car All GM!" This manifold is dated 3/7/62 and i...

This is for a Good Used Chevrolet Corvette LT1 Camaro Z28 Aluminum Intake Manifold (GM Part Number 3972110, GM Group Number 3.265) for 1970 70. It is dated 10/23/69. It has some minor intake port matching work done, (SEE PICTURES).  "Keep Your GM Car All GM!" This will not fit under the stock small block hood. NOT...

This is a Nice Good Used Offenhauser 360 Intake Manifold Model 5766 Hi Rise for BBC Big Block Chevy 396/402/427/454 Rectangular Port.This item can be picked up at our Corvette Parts and Service Center, Tracy Performance, 29069 Calahan Road, Roseville, Michigan 48066-1805, (just Northeast of Detroit), to save shipping c...

This is a Edelbrock Torker SBC Aluminum Manifold, Model 2725 for 1955 - 1985...

This is a Nice Good Used Offenhauser 360 Intake Manifold Model 5693 Hi Rise for Small Block Chevy 283 327 350 400 302.This item can be picked up at our Corvette Parts and Service Center, Tracy Performance, 29069 Calahan Road, Roseville, Michigan 48066-1805, (just Northeast of Detroit), to save shipping costs.Please ema...

This is a Good Used 2101 Edelbrock Performer Aluminum Intake Manifold for 1955 55 1956 56 1957 57 1958 58 1959 59 1960 60 1961 61 1962 62 1963 63 1964 64 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 and 1982 Small Block Chevys wi...

This is a Good used POLISHED Edelbrock RPM AIR GAP BBC Large Rectangular Port Aluminum Manifold, Model 7562 for 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 1982 82 1983 83 1984 84 1985 85 1986 86 1987 87 1988 88 1989 89 and 1990...

This is a New Edelbrock RPM AIR GAP BBC Large Rectangular Port Aluminum Manifold, Model 7562 for 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 1982 82 1983 83 1984 84 1985 85 1986 86 1987 87 1988 88 1989 89 and 1990 90.  It h...

This is a Good Used 2101 Edelbrock Performer Aluminum Intake Manifold that has been powdered coated burgundy.   The bolt pattern is for the standard Holley Square Bore or similar 8 bolt hole Carter AFB or Edelbrock Carbs with 5 1/8" on the studs left to right and 5 5/8" on the studs front to rear. It  &nbs...

This is a Good Used Edelbrock Aluminum Model C3BX Intake Manifold for 1955 55 1956 56 1957 57 1958 58 1959 59 1960 60 1961 61 1962 62 1963 63 1964 64 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 and 1982 Small Block Chevys with 2...

This is for a Good Used Original Chevy Corvette Q-Jet Iron Intake Manifold (GM Part Number 346250, GM Group Number 3.265) used in 1975 75 1976 76 1977 77 1978 78 and 1979 79 Chevy and other GM V8 SBC Engines. Your choice of one, (1), of the following casting dates, while supply lasts. They have had the oil shields remo...

This is for a Good Used Original Chevrolet SBC Q-Jet Iron Intake Manifold (GM Part Number 14057057, GM Group Number 3.265) used in 1980 80 1981 81 1982 82 1983 83 1984 84 1985 85. It has the oil shields removed, hot tanked, shot blasted, cleaned, magnafluxed and ready to be installed on your driver or show car. It is g...

This is for a Good Used Original GM Marine Q-Jet Iron Intake Manifold (GM Part Number 14057055, GM Group Number 3.265) used in 1980 80 1981 81 1982 82 1983 83 1984 84 1985 marine applications. It has had the oil shields removed, is has been hot tanked, shot blasted, cleaned, magnafluxed and ready to be installed on you...

This is for a Refurbished Chevrolet Q-Jet Iron Intake Manifold (GM Part Number 14007376, GM Group Number 3.265) used in 1977 77 1978 78 1979 79 1980 80. Your choice of one, (1), of the following casting dates listed below. They have had the oil shields removed, they were hot tanked, shot blasted, cleaned, magnafluxed a...

This is for a Good Used Original Chevy Corvette Q-Jet Iron Intake Manifold (GM Part Number 346249, GM Group Number 3.265) used in 1975 75 1976 76 1977 77 1978 78 1979 79. DATE CHOICES LISTED BELOW. They have had the oil shields removed, they were hot tanked, shot blasted, cleaned, magnafluxed and ready to be installed ...

This is for a Good Used Original Chevy Corvette Q-Jet Iron Intake Manifold (GM Part Number 340261, GM Group Number 3.265) used in 1973 73 1974 74. Your choice of one, (1), of the following casting dates listed below. They have had the oil shields removed, they were hot tanked, shot blasted, cleaned, magnafluxed and rea...

This is for a Good Used Original Chevy Corvette Q-Jet Iron Intake Manifold, (GM Part Number 3997771, GM Group Number 3.265), used in 1972 72 1973 73 with 350 cid. Your choice of one, (1), of the following casting dates listed below. They have had the oil shields removed, they were hot tanked, shot blasted, cleaned, mag...

This is Good Used Original Chevy Corvette Q-Jet Iron Intake Manifold, (GM Part Number 6263751, GM Group Number 3.265), used in 1971 71 1972 72 1973 73. Your choice of one, (1), of the following casting dates listed below. They have had the oil shields removed, they were hot tanked, shot blasted, cleaned, magnafluxed an...

This is for a  Good Used Original Chevy Corvette Q-Jet Iron Intake Manifold (GM Part Number 3965577, GM Group Number 3.265) used in 1970 70. Your choice of one, (1), of the following casting dates listed below. They have had the oil shields removed, they were hot tanked, shot blasted, cleaned, magnafluxed and read...

This is for One Good Restored Original Chevy, Chevelle, Camaro, Nova, Corvette, Truck, Boat Marine and Stationary Engines, Q-Jet Iron Intake Manifold, (GM Part Number 3927184, GM Group Number 3.265), used in 1968 68 1969 69 1970 70. Your choice of one, (1), of the following casting dates listed below. They have had the...

This is for a Good Used Original Chevy Corvette Q-Jet Iron Intake Manifold (GM Part Number 3919803, GM Group Number 3.265) used in 1968 68. Your choice of one, (1), of the following casting dates listed below. They have had the oil shields removed, they were hot tanked, shot blasted, cleaned, magnafluxed and ready to b...

This is for a Good Used Original that will be refurbished before shipment. Chevrolet Q-Jet Iron Intake Manifold GM Part Number 3905393 fits 1967 Chevrolet small block.   They have had the oil shields removed for cleaning and inspection for cracks, then they were hot tanked, shot blasted, cleaned, magnaflux...

This is for a Good Used Original Chevrolet Q-Jet Iron Intake Manifold (GM Part Number 3875954, GM Group Number 3.265) used in 1966 66. Your choice of one, (1), of the following casting dates, A 5 6 or A 27 6 while supply lasts. They have had the oil shields removed, they were hot tanked, shot blasted, cleaned, magnaflu...

This is a Edelbrock Aluminum Manifold Adapter Plate Model 8716 for BBC Big Block Chevy. This adapter plate is 2 Inches thick. This includes Adapter, Gaskets and Stud Kit. I may also fit other vehicles, but do your own research to verify proper fit.Please search the web for info on TracyVette and thanks for your interes...

This is a Edelbrock Victor 454-R BBC Rectangular Port Satin Finish Aluminum Manifold Model 2907 for 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 1982 82 1983 83 1984 84 1985 85 1986 86 1987 87 1988 88 1989 89 and 1990 90 with Big...

This is for an Edelbrock Performer 2-0 Big Block Chevy, (BBC), Single Quad Aluminum Intake Manifold, (Model 2161), for 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 1982 82 1983 83 1984 84 and 1985 85 396, 402, 454 and 502 Engines...

This is a Good Used Edelbrock BBC Street Tunnel Ram Aluminum Intake Manifold 7190 and Lid 7191, for 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 1982 82 1983 83 1984 84 and 1985 85 Big Block Engines with Oval Port, (Round Port), ...

SEE Item # 1909 This is a Edelbrock Torker II 2-R BBC Large Square Port Aluminum Manifold, Model 2745 for 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 1982 82 1983 83 1984 84 1985 85 1986 86 1987 87 1988 88 1989 89 and 1990 90. ...

This is for a Good Used Weiand SBC, Small Block Chevrolet, Chevy, Aluminum Intake Manifold Model 7547 Accelerator, (X-CELLerator), designed for Holley carburetors on 1955 to 1986 cars with 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400 CID Small Block Chevrolet engines and 1987-1991 SBC engines. It has been glass ...

This is for a Good Used General Motors Aluminum Intake Manifold, (GM Part Number 14102006, GM Group Number 3.265).  We are not sure of usage so do your own research to verify proper fit. "Keep Your GM Car All GM!" Please search the web for info on TracyVette and thanks for your interest!The Copyrighted I...

This is a Very Nice Used Offenhauser SBC Aluminum Low Profile Rectangular Port Intake Manifold (MODEL 5253) for 1955 55 1956 56 1957 57 1958 58 1959 59 1960 60 1961 61 1962 62 1963 63 1964 64 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 ...

This is a Nice Good Used Offenhauser SBC Polished Aluminum Low Profile Rectangular Port for 1955 55 1956 56 1957 57 1958 58 1959 59 1960 60 1961 61 1962 62 1963 63 1964 64 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 1982 82 1983...

This is for a Good Used Weiand SBC, Small Block Chevrolet, Chevy, Aluminum Intake Manifold Model 8016 Stealth. This model is designed for Holley carburetors on 1955 to 1986 cars with 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400 CID Small Block Chevrolet engines and 1987-1991 SBC engines. It has been glass beaded...

This is a Good Used Weiand SBC, Small Block Chevrolet, Chevy, Aluminum CUSTOM PORTED SPECIAL HIGH PERFORMANCE Intake Manifold Model #7546. This model is designed for square-bore carburetors on 1955 to 1986 cars with 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400 CID Small Block Chevrolet engines and 1987-1991 SBC ...

This is for One Very RARE, Original Chevy and Corvette Aluminum Dual Quad Manifold GM Part Number 3739653, for model years: 1957 1958 1959 1960 1961. Several dates available. NOTE: The attached photo is a similar file photo, may not be the photo of the exact date part.   Dates: 12-20 12-17 2-...

This is a Very Nice Original Chevy Chevrolet Aluminum Manifold, (GM Part Number 3814678, GM Group Number 3.265) for 1961 61 1962 62 1963 63 with 409 CID Engines. It is dated 2-16-62.  We also have complete engines and other 409 parts in other listings. "Keep Your GM Car All GM!" The lower oil heat shield was remov...

This is a Very Nice Original Chevy Chevrolet AFB Dual Quad Aluminum Manifold, (GM Part Number 3814881, GM Group Number 3.265) for 1961 61 1962 62 1963 63 1964 64 with 409 CID Engines.  We also have complete engines and other 409 parts in other listings. "Keep Your GM Car All GM!" NOTE: The attached photo is a simi...

This is for an Edelbrock C454 Big Block Chevy, (BBC), Aluminum Intake Manifold, (Model C454), for 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 1982 82 1983 83 1984 84 and 1985 85 396, 402, 454 and 502 Engines. It will accept the ...

This is a Nice Used Holley 701R-5 300-5 BBC Strip Dominator, Single Plane, Large Port, (Rectangular Port), Big Block Chevy Aluminum Intake Manifold for High RPM, High Horsepower Engines with Big Carburetors with an Air Gap under the Center and with No EGR Provisions. This is a single plane intake set up for a single Ho...

This is a Good Used Weiand Rectangular Port Intake Aluminum Manifold model 7513 for Big Block Chevys BBC in 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 1982 82 1983 83 1984 84 1985 85 Chevy Engines.Please search the web for info...

This is a Nice Good Used Edelbrock Model TM2R Model 2695 for Big Block Chevy 396, 402, 427, 454 and 502 Engines with the Rectangular Port Heads.  With a straight edge across the carb flange, it measures 4.5" at the front of the intake and it measures 5.5" at the back of the intake.Please search the web for info on...

This is a Nice Good Used Edelbrock Torker 2-0 Model 2740 for Big Block Chevy 396, 402, 427, 454 and 502 Engines with the Oval Port Heads. Please search the web for info on TracyVette and thanks for your interest!The Copyrighted Info and Pictures are the Property of Tracy Performance!...

This is a Nice Good Used Offenhauser 360 Model 6003-DP for Big Block Chevy 396, 402, 427, 454 and 502 Engines with the Rectangular Port Heads, Please search the web for info on TracyVette and thanks for your interest!The Copyrighted Info and Pictures are the Property of Tracy Performance!...

This is a Nice Good Used Edelbrock BBC Victor 2-R 2905 Air Gap for Big Block Chevy 396, 402, 427, 454 and 502 Engines and Variations of Them with the Rectangular Port Heads. Please search the web for info on TracyVette and thanks for your interest!The Copyrighted Info and Pictures are the Property of Tracy Performance!...

This is for an Edelbrock C427X Big Block Chevy, (BBC), Single Quad Aluminum Intake Manifold, (Model C427X), for 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 1982 82 1983 83 1984 84 and 1985 85 396, 402, 454 and 502 Engines. It wi...

This is a Good Used 2101 Edelbrock Performer Aluminum Intake Manifold for 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 and 1982 Small Block Chevys with 262 267 283 302 305 327 350 and 4...

This is for a Good Used Weiand SBC, Small Block Chevrolet, Chevy, Aluminum Intake Manifold Model 7530 "TEAM G". This model is designed for square-bore carburetors on 1955 to 1986 cars with 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400 CID Small Block Chevrolet engines and 1987-1991 SBC engines equipped with L98 a...

This is a Good Used Edelbrock Aluminum Model 3225 StreetMaster Intake Manifold for 1955 55 1956 56 1957 57 1958 58 1959 59 1960 60 1961 61 1962 62 1963 63 1964 64 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 and 1982 Small Block ...

This is a Edelbrock Torker II Aluminum Manifold, (2500-6500 rpm power range), for 1955 55 1956 56 1957 57 1958 58 1959 59 1960 60 1961 61 1962 62 1963 63 1964 64 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 1982 82 1983 83 1984 8...

This is for a Good Used Chevrolet Corvette Aluminum Intake Manifold, (GM Part Number 3959594, GM Group Number 3.265), for 1971 71 and 1972 72 Corvette. "Keep Your GM Car All GM!" This is what you need for your Bloomington Gold, NCRS Top Flight Restoration or Survivor Car!  If this is not the intake manifold you ne...

This is for a Good Used Chevrolet Corvette Camaro Aluminum Intake Manifold (GM Part Number 3972116, GM Group Number 3.265) for 1970 70 with LT1. "Keep Your GM Car All GM!" This is what you need for your Bloomington Gold, NCRS Top Flight Restoration or Survivor Car!If this is not the intake manifold you need, please see...

This is for a Good Used Chevrolet, Chevelle, Camaro, Nova, Corvette, etc. High Rise Aluminum Intake Manifold, (GM Part Number 14044836, GM Group Number 3.265) for Chevy Small Block V-8 Engines using late model heads with the more verticle inner bolts. This manifold's intake to head bolt holes have been modified for the...

This is for a Good Used Chevrolet Corvette Nova Chevy II Camaro Chevelle Aluminum Intake Manifold, (GM Part Number 3893594, GM Casting Number 3890490, GM Group Number 3.265), for 1966 66 1967 67 Chevy Engines.  Available dates listed below. "Keep Your GM Car All GM!" This is what you need for your Bloomington Gold...

This is for a Good Used Rare Chevrolet Corvette Aluminum Intake Manifold (GM Part Number 14007378, GM Group Number 3.265) for 1978 78 1979 79. NOTE: The attached photo is a similar file photo, not a photo of the exact part. "Keep Your GM Car All GM!" This is what you need for your Bloomington Gold, NCRS Top Flight Rest...

This is for a Good Used Chevrolet Corvette Aluminum Intake Manifold (GM Part Number 14033057, GM Casting Number 14033058, GM Group Number 3.265) for 1981 81 Corvettes, Camaros, and Full Size Chevy V-8's with 4 Barrel Quadrajet Carburetors. This probably also fits Pontiac Firebirds and other cars, trucks, boats and indu...

This is for a Good Used Chevrolet Corvette Aluminum Intake Manifold, (GM Part Number 14057053, GM Group Number 3.265), for 1978 78 1979 79 1980 80 1981 81 Corvettes and Camaros. It may also have other uses on V-8 passenger cars, trucks, boats and industrial engines.  It comes complete with the lower oil splash hea...

This is for a Good Used Small Block Chevrolet, Chevy, Aluminum Intake Manifold Model 7504. This model is designed for square-bore carburetors in 1955 55 1956 56 1957 57 1958 58 1959 59 1960 60 1961 61 1962 62 1963 63 1964 64 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76...

This is a Good Used SBC Aluminum Holley Street Dominator Aluminum Intake Manifold Model 701R-19 300-19 for 1955 55 1956 56 1957 57 1958 58 1959 59 1960 60 1961 61 1962 62 1963 63 1964 64 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 ...

This is a Good Used SBC Aluminum Holley Street Dominator Aluminum Intake Manifold model 701R-1 3001 (S/N 03308N) for 1955 55 1956 56 1957 57 1958 58 1959 59 1960 60 1961 61 1962 62 1963 63 1964 64 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 198...

This is a Good Used SBC Aluminum Holley Street Dominator Aluminum Intake Manifold model 701R-1 3001 (S/N 12086) for 1955 55 1956 56 1957 57 1958 58 1959 59 1960 60 1961 61 1962 62 1963 63 1964 64 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980...

This is for ONE, Good Used Original Chevy Casting Big Block Aluminum High Rise Square Port Intake Manifold, (GM Part Number 3933163, GM Group Number 3.265). Dates available are 6-1-67, 12-23-67, 1-16-68, 6-6-68, 6-11-68, 12-24-68, 4-15-69, 5-7-69  and twoundated Service Replacement dated Intakes, 6-20-85, WHI...

This is a Good Used 2104 Edelbrock Performer Aluminum Intake Manifold for Late Model Small Block Heads with the Canted Center Intake Bolt Holes for 1987 87 1988 88 1989 89 1990 90 1991 91 1992 92 1993 93 1994 94 1995 95 Small Block Chevy Heads with Various Small Block Engines Including 262 265 267 283 302 305 327 350 a...

This is a Edelbrock Torker II 2-R BBC Large Square Port Aluminum Manifold, Model 2745 for 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 1982 82 1983 83 1984 84 1985 85 1986 86 1987 87 1988 88 1989 89 and 1990 90. With a straight e...

This is a Good Used Weiand Action Plus Dual Plane Oval Port Intake Aluminum Manifold model 8005 for Big Block Chevys BBC in 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 1982 82 1983 83 1984 84 1985 85 1986 86 1987 87 1988 88 1989...

This is an Good Used Edelbrock EP4B Aluminum Manifold for 1955 55 1956 56 1957 57 1958 58 1959 59 1960 60 1961 61 1962 62 1963 63 and 1964 64 Small Block Pontiac Engines. This manifold is ready to go on your street or show car. It may also fit other vehicles, but do your own research to verify proper fit. This would be...

This is for ONE, Good, Very Slightly Used, (Mounted But Not Run), Original Chevy Service Crate Engine High Silicon, High Quality Zeus Foundry Casting Big Block Aluminum High Rise Square Port Intake Manifold, (GM Part Number 3933163, GM Group Number 3.265, No Date Code), Originally Designed for 1968 68 and 1969 69 High ...

This is for a Good Used Original Chevy Marine Aluminum Intake Manifold (GM Part Number 7013073, GM Group Number 3.265) used in 1955 55 1956 56 1957 57 1958 58 1959 59 1960 60 1961 61 1962 62 1963 63 1964 64 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1...

This is for ONE, New Chevy Corvette BBC Oval Port High Rise Aluminum Intake Manifold (GM Part Number 12363420, GM Cast Number 12363416, GM Group Number 3.265) for 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 and 1980 80. It has a spread bor...

This is for ONE Good Used Original Chevy Camaro Small Block Aluminum High Rise Intake Manifold (GM Part Number 3932472, GM Group Number 3.265) for 1969 69 Z28 DZ 302 Engine. It is dated 12 24 68. Please check your application before buying! If this is not the intake you are looking to purchase, see our other eBay listi...

This is for ONE, Good Used Original Chevy Corvette L88, (L-88), and Camaro ZL1, (ZL-1), Big Block Aluminum High Rise Square Port Intake Manifold, (GM Casting Number 3933198, GM Group Number 3.265), for 1967 67 1968 68 and 1969 69 427 430HP L88 and ZL1 BBC Engine. We currently 2 available while supply lasts. The one in ...

This is for ONE, Good Used Original Chevy Corvette Big Block Aluminum Low Rise Oval Port Q-Jet Intake Manifold (GM Part Number 3947801, GM Group Number 3.265), for 1969 Corvettes with the 427/390 HP BBC Engine. This intake does have slight pitting in the coolant areas, but nothing that won't seal up properly.  Thi...

This is a for 1 Very, Very Rare, Good Used, Original High Rise L-88 Aluminum Square Bore Holley for Large, (Square), Port Head Intake Manifold with the Casting Number of 3886093, (GM Part Number 3886092, GM Group Number 3.265), for the 427 Big Block 1967-1968 Corvette with this Rare Racing Engine Option. It has no plen...

This is for a Good Used Weiand SBC, Small Block Chevrolet, Chevy, Aluminum Intake Manifold Model 7546. This model is designed for square-bore carburetors on 1955 to 1986 cars with 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400 CID Small Block Chevrolet engines and 1987-1991 SBC engines equipped with L98 aluminum C...

This is for a Good Used GMC 671 Polished Blower, (Supercharger), BBC, (Big Block Chevy), Intake Manifold.  It will fit 396, 402, 427, 454 and Other Variations of the Big Block Chevy Engine.  It is for the large port, (square port), cylinder heads.  It has the built in pop off valve in the back and a ther...

This is for a Nice Good Used Black Plastic Fuel Injection Intake Manifold Assembly, (GM Part Number 12560688, GM Group Number 3.265), for 1997 97 1998 98 1999 99 2000 00 2001 01 2002 02 2003 03 and 2004 04 Chevrolet C5 Corvette, Camaro, Firebird with the 5.7L LS1 engine. It may also fit other various engines in the LS...

This is a Good Used Edelbrock BBC Tunnel Ram Aluminum Intake Manifold, (Model TR2X 2 x 4), for 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 1982 82 1983 83 1984 84 and 1985 85 Big Block Engines. This rectangular, (large square), ...

This is for an Edelbrock Performer 2-0 Big Block Chevy, (BBC), Single Quad Aluminum Intake Manifold, (Model 2161), for 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 1982 82 1983 83 1984 84 and 1985 85 396, 402, 454 and 502 Engines...

This is a Edelbrock Torker II Aluminum Manifold, (2500-6500 rpm power range), for 1955 55 1956 56 1957 57 1958 58 1959 59 1960 60 1961 61 1962 62 1963 63 1964 64 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 1982 82 1983 83 1984 8...

This is a Good Used Small Block Mopar Cast Iron Thermoquad or Quadrajet Q-Jet 4 BBL, (4 Barrel) Carburetor 340 CID Intake Manifold, (Casting Number 3614025-1) for 1971 71 1972 72 Dodge, Chrysler, Plymouth Applications. It has a casting date of 10 8 71, (Oct 8 1971). It has already been hot tanked, shot blasted, tumbl...

This is for One Very Nice Original Used 1978 78 1979 79 Pontiac Q-Jet, (QuadraJet), Cast Iron Intake Manifold, (GM Part Number 10003395, GM Group Number 3.265), with a Casting Date of B 22 8, Feb 22 1978. This intake has NO REPAIRS! This manifold was used on Pontiac engines with 400 CID engines but check for other ap...

This is for a Very Rare Good Used Original Chevy Corvette Q-Jet Iron Intake Manifold (GM Part Number 3973469, GM Group Number 3.265) used in 1971 71. Your choice of one, (1), of the following casting dates, D 20 1, E 20 1 or E 27 1 while supply lasts. They have had the oil shields removed, they were hot tanked, shot bl...

This is a Used Original Chrysler Cast Iron Sread Bore Intake Manifold (Part Number 4323352) used in 1985 85 1986 86 1987 87 1988 88 1989 89 in 318 Engines and 1986 86 1987 87 1988 88 1989 89 1990 90 1991 91 and 1992 92 in 360 Engines. It is dated 12-15-86. It is ready to go - just bolt on. This would be great for your ...

This is a Good Used Original Chevy Chevrolet CI Intake Manifold (GM Part Number 333841, GM Group Number 3.265) for 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 and 1982 82 with BBC 454 CID Engines.  It is for a low deck engine, not the heavy duty high deck semi tractor, dump truc...

This is a Good Used Original Chevy Chevrolet Q-Jet, (Quadrajet), Intake Manifold (GM Part Number 3856289, GM Group Number 3.265), used in 1965 65 on the full size Chevy with BB Big Block engines. Your choice of (1) casting dates E 10 5,  E 11 5. or E 25 5. This manifold is ready to be painted and bolted on to your...

This is a Good Used Polished Weiand Small Block Chevy Cross Ram Aluminum Intake Manifold Model #7291. This Small Block Chevy, (SBC), dual quad, 2 X 4, intake comes with 2 used Holley 450 CFM 4BBL carbs List Number 9776, both dated 3222. This could be used on your SBC from 1955 55 1956 56 1957 57 1958 58 1959 59 1960 60...

This is for a Good Used Original Cast Iron 541690 3 X 2 Cast Iron 1962, (62), Full Size Pontiac Tripower, (Tri-Power), Intake Manifold Dated K 30 1, (Nov 30, 1962). It is already painted Pontiac V-8 blue, but might require minor touch up before installation. We also have a couple of 2 barrel, (2 BBL), carbs available i...

This is for a New Old Stock, Discontinued Weiand Small Block Chevrolet, Chevy, Aluminum Intake Manifold Model 7546. This model is designed for square-bore carburetors in 1957 to 1986 with 262, 265, 267, 283, 302, 307, 327, 350 and 400 CID Small Block Chevrolet engines and 1987-91 SBC engines equipped with L98 aluminum ...

This is a New SBC, Small Block Chevy 41501 ProMotive Twister Series Satin Finished Aluminum Intake Manifold for 1955 55 1956 56 1957 57 1958 58 1959 59 1960 60 1961 61 1962 62 1963 63 1964 64 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 ...

This is for a Good Used Rare 1359122 1964 Only Aluminum Buick 4 BBL, (Four Barrel), Intake Manifold from a 300 CID Engine with Aluminum Heads. This 1964 Buick engine and only this engine had the aluminum heads and the aluminum intake from the factory. It is a rare lightweight piece that works well for compact installa...

This is a Good Used Small Block Mopar Square Bore Cast Iron 4 BBL, (4Barrel) 340 CID Intake Manifold, (Casting Number 2531915-2) for 1968 68 1969 69 and 1970 70 Dodge, Chrysler, Plymouth Applications. It has a casting date of 3 17 9, (March 17, 1969). Please search the web for info on TracyVette and thanks for your i...

This is a Very Nice Used Edelbrock Performer RPM Chevy Aluminum Intake Manifold for 1955 55 1956 56 1957 57 1958 58 1959 59 1960 60 1961 61 1962 62 1963 63 1964 64 1965 65 1966 66 1967 67 1968 68 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 1979 79 1980 80 1981 81 and 1982 Small Block...

NOTE: THIS INTAKE HAS SINCE BEEN PAINTED IN PONTIAC V-8 ENGINE BLUE! This is for One Very Nice Original 65 1965 Pontiac Cast Iron Tri-Power, (3 X 2), Intake Manifold, (GM Part Number 9778818, GM Group Number 3.265), and the Casting Date is E 18 5, May 18, 1965. This intake has NO REPAIRS! . This is the only tri-power ...

This is a 9782898 3 X 2 Cast Iron 1966 66 GTO and Full Size Pontiac Tripower, (Tri-Power), Cast Iron Intake Manifold Date B 5 6, (February 5, 1966). It has been hot tanked, shot blasted, tumbled, cleaned, inspected and magnafluxed and it is guaranteed to have no cracks. It is already painted Pontiac V-8 blue, but mig...

This is a 9775088 3 X 2 389 and 421 Cast Iron 1964 Pontiac Full Size and GTO Tri-Power Intake Manifold 1964 Dated F 4 4, (6/4/1964). It has been hot tanked, shot blasted, tumbled, cleaned, inspected and magnafluxed and it is guaranteed to have no cracks. It is already painted Pontiac V-8 blue, but might require minor...

This is a Rare 580677 Original Used Cast Iron 4 Four BBL Barrel Intake Manifold Dated I 1 7 with a 4.25" X 5.5" Square (Carb), Carburetor Stud Pattern. We are not sure what year it is for, but we would guess in was cast on September 1st, 1957 for a 1958 Model Year Oldsmobile V-8 Engine. Please email us more info if you...

This is for One GM original Winters Aluminium Low Rise Intake Manifold GM# 3963569, GM Group 3.265, fits 1970 1971 Corvettes with 454 Big Block.   This low rise, intake manifold was used on these cars with high performance big blocks to give the proper hood clearance they needed. Square Bore, Holley Large ...